Changing Maximum Security Profile Default Values; Other Restrictions When Using The Maximum Security Profile - Polycom RealPresence Group Series Administrator's Manual

Admin Settings Area
Enable Recording
Service
Diagnostics Area
System
System Log Settings

Changing Maximum Security Profile Default Values

When you configure the system to use the Maximum Security Profile, the system forces you to change
the following settings from their default values:
• Admin account User Id
• User account User Id
• Admin room password
• Admin remote access password
• User room password
• User remote access password

Other Restrictions When Using the Maximum Security Profile

The following settings are not available in the "User Settings" menu (they are configurable only in their
respective sections of the Admin Settings):
• Camera > Allow Other Participants in a Call to Control Your Camera
• Meetings > Mute Auto Answer Calls
Polycom, Inc.
Maximum
Range
Checkbox
Domain Name
User Name
Password
Server Address
Enable Remote Logging
Remote Log Server Transport Protocol
Security Profile Default Settings
Default Value Configurable?
Disabled Yes
Maximum
Default
Range Value
Checkbox Disabled
UDP TLS
TCP
TLS
Configura
ble?
Yes
Read only
328