Configure Rs-232 Serial Port Settings - Polycom RealPresence Group Series Administrator's Manual

Setting
Tracking Mode (Polycom EagleEye
Producer Camera)
Tracking Speed (Polycom EagleEye
Producer Camera)
Framing Size (Polycom EagleEye Producer
Camera)

Configure RS-232 Serial Port Settings

You can configure RS-232 serial port settings in the system web interface.
Polycom, Inc.
Description
Specifies the camera tracking mode.
• Frame Speaker: Enables the camera to automatically locate
and frame the active speaker. When someone else starts
speaking, the camera switches to that person.
Note: When you mute the local microphone, the camera
tracking mode automatically switches to Frame
Group.
• Frame Group: Enables the camera to automatically locate and
frame participants in the room without moving the camera.
• Frame Group with Transition: (EagleEye Producer camera
only) Enables the camera to automatically locate and frame
participants in the room while moving the camera. For example,
if someone enters the room, you might see the camera pan
until that person is in view.
• Off: Disables automatic tracking. You must handle all camera
control manually.
Note: Only available when you have installed an EagleEye
Producer camera.
Specifies the tracking speed. The room environment can have an
influence on the speed of locating new speakers in the room.
• Slow—Detects meeting participants at a slow speed rate.
• Normal—This is the default tracking speed. Detects meeting
participants at a normal speed rate.
• Fast—Detects meeting participants at a fast speed rate.
Note: Only available when you have installed an EagleEye
Producer camera.
Specifies the framing view.
• Wide: Establishes a wide view of meeting participants.
• Medium: (Default group framing view) Establishes a medium
view of meeting participants.
• Tight: Establishes a close-up view of meeting participants
Note: Only available when you have installed an EagleEye
Producer camera.
Configuring Video Settings
159