Separation Roller Replacement - Ricoh FT8680 Service Manual

ARDF

12.2 SEPARATION ROLLER REPLACEMENT

[D]
1. Open the entrance cover [A].
2. Remove the front cover [B] of the original feed unit (2 screws).
3. Remove the separation roller shaft stopper [C] (1 screw).
4. Slide out the separation roller shaft [D].
5. Replace the separation rollers [E].
NOTE: When installing the separation rollers, set them so that the mark
[F] of the rollers face to the front of the machine.
[B]
[A]
[C]
5-104
31 July 1995
[E]
[F]
A171R660.img