Ricoh FT8680 Service Manual page 340

31 July 1995
12.7 RELAY ROLLER REMOVAL
[A]
[D]
[C]
1. Remove the right rear cover (2 screws).
2. Remove the 2 screws [A] fixing the bracket to the operation unit shaft [B].
3. Remove the screw [C] fixing the ground line. Disconnect the connector
[D].
4. Remove the operation unit [E].
5. Remove the operation unit shaft cover [F] (3 screws), feed unit front cover
[G] (2 screws), rear cover [H] (3 screws) and left cover [I] (3 screws).
6. Mark the position of the tension bracket [J] and loosen the 3 screws [K].
Then remove the timing belt [L].
[B]
A171R643.img
[E]
[H]
[G]
5-111
[I]
[K]
[J]
A171R652.img
ARDF
[F]
[L]