OPTICS
– Black Wire –
20. Set the bead of the black wire [A] into the slot of the scanner drive pulley
as shown and wrap the wire four times on the pulley from top to bottom
clockwise.
21. Run the black wire through the pulleys as shown.
Use the following tracks of the pulley:
[B]: Lower
[C]: Upper
22. Fix the wire end with the bushing [D], the ring nut [E], and the nut [F].
[D]
[A]
5-16
[E]
[F]
[B]
A171R555.img
31 July 1995
[C]