Belt Tension Adjustment - Ricoh FT8680 Service Manual

ARDF

12.20 BELT TENSION ADJUSTMENT

[A]
[a]
1. Remove the rear cover of the paper feed unit and adjust the belt [A]
tension with the tightener [a].
Standard: 3 mm deflection at 500 ± 100 g pressure.
2. Remove the rear cover of the paper feed unit and adjust the belt [B]
tension with the motor position bracket (2 screws [b]).
Standard: 2 mm deflection at 200 ± 80 g pressure.
3. Remove the upper cover of the transport unit and adjust the belt [C]
tension with the tightener [c].
Standard: 3 mm deflection at 400 ± 100 g pressure.
[B]
A171R644.img
[A]
A171R655.img
[c]
[C]
A171R654.img
5-126
[D]
[C]
[b]
31 July 1995
[E]
A171R646.img
[B]
A171R653.img