Ricoh FT8680 Service Manual page 312

31 July 1995
[C]
[B]
8. Remove the fusing exit guide plate [A] and lower fusing entrance guide
plate [B] (2 screws each).
9. Remove the pressure roller [C].
10. Remove the bushing [D] and bearing [E] (1 C-ring) from the shaft.
11. After reassembling the machine, check the nip width and adjust fusing
pressure if necessary. (See fusing pressure adjustment.)
[A]
A171R632.img
5-83
IMAGE FUSING
[D]
[E]
A171R617.img