Ricoh FT8680 Service Manual page 326

31 July 1995
[A]
[D]
4. Remove the guide mylar [A] (2 snap rings).
5. Remove the snap ring [B] and bushing [C].
6. Remove the drive roller [D].
7. Replace the three separation belts [E] as a set.
NOTE: Make sure that the snap rings [F] do not touch the separation belt.
When setting the tension spring [G], set it on the hook [H].
The white side of the separation belts should be face out.
[C]
[H]
A171R503.wmf
[G]
5-97
[B]
[E]
[F]
A171R509.wmf
DUPLEX