Ricoh FT8680 Service Manual page 345

ARDF
12.11 JOB SEPARATION UNIT REMOVAL
[C]
[A]
1. Remove the upper front cover [A] (2 screws) and the lower front cover [B]
(1 screw).
2. Remove the job separation H. P. sensor [C] (1 screw).
3. Remove the DF main board [D] (3 screws).
4. Remove the 2 screws [E], disconnect the 2 connectors [F], and remove
the job separation unit [G].
[E]
[B]
5-116
31 July 1995
[F]
[G]
A171R671.img
[D]