31 July 1995
3.7 DEVELOPMENT ROLLER REPLACEMENT
1. Remove the developer.
2. Remove the development unit.
3. Remove the bias terminal [A] (2 screws with star washer and 1 lead wire).
4. Remove the magnet angle levers [B] (1 screw and 1 E-ring each).
NOTE: Do not loosen three screws [C] with white paint fixing the
development unit guide.
5. Remove the entrance seal bracket [D] (2 screws).
[C]
[A]
A171R547.img
5-35
DEVELOPMENT
[C]
[B]
A171R570.img
[D]