Ricoh FT8680 Service Manual page 339

ARDF
12.6 TRANSPORT BELT UNIT REMOVAL
[A]
[B]
1. Remove the screw [A] fixing the inverter cover shaft bracket [B] and
remove the inverter cover [C].
2. Remove the transport unit cover [D] (7 screws).
3. Mark the position of the tension bracket [E] and loosen the screw [F].
4. Remove the timing belt [G].
5. Remove the 4 screws [H] fixing the transport belt unit hinge.
6. Release the transport belt unit [I] and remove it.
[C]
[D]
A171R665.img
5-110
[I]
[E]
[G]
31 July 1995
[H]
[F]
A171R645.img