Ricoh FT8680 Service Manual page 343

ARDF
12.9 BELT MOTOR / INVERTER MOTOR REPLACEMENT
[J]
[L]
[A]
1. Remove the inverter cover and the transport unit cover.
2. Mark the position of the transport belt drive timing belt tension bracket [A]
of the transport belt drive and loosen the screw [B].
3. Mark the position of the inverter drive belt tension bracket [C] and loosen
the screw [D].
4. Disconnect the 2 connectors [E] of the belt motor [F] and the 2 connectors
[G] of the inverter motor [H].
5. Remove the motor bracket [I] (4 screws).
6. Mark the position of each motor positioning plate [J] and loosen the each
3 screws [K].
7. Replace the belt/inverter motor (3 screws [L] each).
[E]
[K]
[B]
5-114
[I]
[L]
[H]
[K]
[F]
31 July 1995
[G]
[C]
[D]
A171R669.img