Exterior Cover Removal - Ricoh FT8680 Service Manual

EXTERIOR AND INNER COVERS

1.2 EXTERIOR COVER REMOVAL

[E]
[D]
– Left Covers –
1. Remove the left upper cover [A] (4 screws).
2. Remove the LCT (see LCT unit removal).
3. Remove the left lower cover [B] (3 screws).
– Rear Covers –
1. Remove the left rear [C] and right rear [D] covers (2 screws each).
– Right Cover –
1. Remove the right cover [E] (2 screws).
– Left Top Cover –
1. Lift the document feeder.
2. Remove the left top cover [F] (7 screws).
NOTE: Use only short screws (less than 6mm) for [G].
[C]
5-2
31 July 1995
[F]
[A]
[B]
A171R510.imd