Ricoh FT8680 Service Manual page 244

31 July 1995
[C]
– Gray Wire –
17. Set the bead of the gray wire [A] into the slot of the scanner drive pulley
as shown and wrap the wire four times on the pulley from bottom to top,
counterclockwise.
18. Run the gray wire through the pulleys as shown.
Use the following tracks of the pulley:
[B]: Upper
[C]: Upper
19. Hook the wire end to the tension spring [D].
[D]
[B]
5-15
OPTICS
[A]
A171R559.img