Ricoh FT8680 Service Manual page 298

31 July 1995
[E]
5. Front wire replacement
a) Insert the blue bead [A] of the new wire into the slot of the drive pulley
[B] and wrap the wire around the drive pulley twice counterclockwise.
b) String the wire over all pulleys, except the tension pulley [C].
c) Wrap the other end of the wire around the drive pulley 3.5 times
counterclockwise and insert the bead into the slot of the drive pulley as
shown.
d) Insert the support beads [D] into the slots of the lift rods [E].
e) String the wire over the tension pulley.
6. Reassemble the machine and confirm the tray operation.
[D]
[C]
5-69
1ST, 2ND, AND 3RD TRAYS
[B]
[A]
A171R612.img