Image Fusing; Fusing Unit Removal - Ricoh FT8680 Service Manual

31 July 1995

9. IMAGE FUSING

9.1 FUSING UNIT REMOVAL

[A]
1. Open the right front door, turn the fusing unit release lever [A]
counterclockwise, and pull out the fusing & inverter unit [B].
2. Turn the fusing unit release lever clockwise and remove it (1 screw).
Remove the fusing cover [C] (3 screws).
3. Disconnect the following connectors:
Fusing lamp [D] (front and rear: 1 connector each)
Thermofuse [E]
Thermistor [F]
4. Open the inverter unit [G] and remove the fusing unit [H] (2 screws).
[E]
[F]
[H]
[D]
[C]
[G]
[B]
5-81
IMAGE FUSING
[D]
A171R525.img