Ricoh FT8680 Service Manual page 320

31 July 1995
10.2 FUSING SENSOR AND EXIT SENSOR REPLACEMENT
10.2.1 Exit Sensor Replacement
1. Pull out the fusing unit.
2. Remove the exit sensor bracket [A] (1 screw).
3. Remove the exit sensor [B] (1 screw and 1 connector).
10.2.2 Fusing Sensor Replacement
1. Pull out the fusing unit.
2. Remove the fusing sensor bracket [C] (1 screw) from the lower side.
3. Remove the fusing sensor [D] (1 screw and 1 connector).
[D]
[C]
5-91
INVERTER & PAPER EXIT
[B]
[A]
A171R632.img