4. Analogue input module CPX−4AE−T
4.4.2 General information on parametrizing
Festo P.BE−CPX−AX−EN en 0503b
If necessary, use parametrizing to set other temperature
sensors, connection designs, diagnostic reactions, etc.
Due in some cases to necessary calculations, modified para
meters are not valid until they have been thoroughly checked
and saved. Until then, as in the case of invalid parameters,
the previous settings apply.
Depending on the parameter, no valid analogue values are
available for up to max. 30 ms after a value modification.
Special instructions on avoiding parametrizing
faults
Parametrize in this sequence:
1. set the temperature sensor and the temperature
coefficients
2. set limit values
3. activate limit value monitoring.
4−17