5. Analogue output module CPX−2AA−U−I
5.1
Function of the analogue output modules
5.2
Fitting
5−4
Analogue output modules provide analogue voltage outputs
or current outputs in the valve terminal for connecting actua
tors and other current−consuming devices (e.g. proportional
directional control valves). At present the following type is
available:
Type
CPX−2AA−U−I
Tab. 5/1:
Overview of analogue output modules
CPX−2AA−U−I
See section 1.3.
Description
This type provides 2 analogue
outputs (output channels) with
scalable value ranges. The output
signal range can be configured
channel by channel, either
electrically isolated or non−floating:
0...10 V
0...20 mA
4...20 mA
Actuator supply 24 V / 2.8 A per
module.
Festo P.BE−CPX−AX−EN en 0503b