Festo CPX-AB Series Electronic Manual page 105

3. Analogue input module CPX−4AE−I
Channel parameters: Filter measured value channel x
Function no. 4828 + m * 64 + 11
Description For the individual channels of the analogue input modules, the filter for
measured values can be set independently of each other.
Bit Bit 0/1:
Bit 2/3:
Bit 4/5:
Bit 6/7:
Values Channel 3
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
0
1
1
Remark Faults can be suppressed with the Filter measured value (see section 3.5.1).
If the module parameter Monitoring parametrizing faults" as well as the
relevant channel parameter Monitoring parametrizing faults" is set to active",
the relevant fault will be displayed.
Tab. 3/15: Filter measured value channel x
Festo P.BE−CPX−A X−EN en 0503b
filter measured value channel 0
filter measured value channel 1
filter measured value channel 2
filter measured value channel 3
Channel 2 Channel 1
0 0 0 0
1 0 1 0
0 1 0 1
1 1 1 1
m = module number (0 ... 47)
Channel 0
0 0 0 No filter measured value
(presetting)
1 0 1 Filter measured value over
2 values
0 1 0 Filter measured value over
4 values
1 1 1 Filter measured value over
8 values
3−23