Festo CPX-AB Series Electronic Manual page 33

1. Overview and connection technology I/O modules
1
Screwdriver, blade
2.5 x 0.4 mm
2
Unlocking opening
(inside)
3
Cable
4
Terminal opening for
inserting the conduc
tors (outside)
5
Terminal strips
Fig. 1/4: Connecting the terminal strips
Festo P.BE−CPX−AX−EN en 0503b
Fitting and removing the cables
Note
To ensure reliable contact, connect only one conductor
·
per spring terminal.
Insert only cables into the terminal opening. The ter
·
minal will be damaged if a screwdriver is inserted into
the opening.
When connecting and disconnecting the cables:
1. Press the screwdriver with a light rotary movement in the
direction of the centre part into the unlocking opening
(see Fig. 1/4).
The cable terminal will then be unlocked.
1
3
4 2 5
1
2
3
4
5
1−15