Festo CPX-AB Series Electronic Manual page 32

1. Overview and connection technology I/O modules
1−14
Sub−base CPX−AB−8−KL−4POL
The completely fitted sub−base CPX−AB−8−KL−4POL complies
with protection class IP20.
Screening/shield
Use a cable as short as possible to connect the cable
·
screening/shield to the FE terminal of the sub−base. Use
suitable core end sleeves for the connection.
Specification of the cable terminals
cable cross−sectional area:
max. current:
insulation removed:
Permitted copper conductors
single wire, multi−wire, fine wire, also with zinc−plated
individual cores
fine wire strands compressed
fine wire with core end sleeves
(sealed against gas, crimped on)
fine wire with pin cable socket
(sealed against gas, crimped on)
*)
If necessary, use next smaller cross−sectional area
2
0.08 ... 1.5 mm
1.5 A
5 ... 6 mm
*)
*)
Festo P.BE−CPX−AX−EN en 0503b