Instructions On Commissioning; Processing Analogue Output Signals - Festo CPX-AB Series Electronic Manual

5. Analogue output module CPX−2AA−U−I
5.4

Instructions on commissioning

5.4.1 Processing analogue output signals

Parametrizing
5−12
The analogue values are transmitted from the control system
to the CPX terminal as output words (2 bytes, 16 bits). Each
analogue output module occupies 2 output words for this in
the address range.
The position of the output words in the address range de
pends on the field bus used (see manual for the field bus
node).
The data format as well as the limit values and, where appli
cable, also the scaling of the analogue output signals can
be adapted by parametrizing. Instructions on this can be
found in the sections 5.4.2 and 5.4.3.
The reaction with the default settings is described below.
Festo P.BE−CPX−AX−EN en 0503b