Festo CPX-AB Series Electronic Manual page 174

5. Analogue output module CPX−2AA−U−I
Module parameters: Monitoring the CPX module
4828 + m * 64 + 0
Function no.
Description With the analogue output modules, monitoring of individual faults can be
activated or deactivated (suppressed) independently of each other. Active
monitoring causes the following: The fault is:
Bit Bit 0:
Bit 1:
Bit 2...6:
Bit 7:
Values 1 = active (presetting); 0 = inactive
Remark
Tab. 5/10: Monitoring the CPX module
5−18
Description of the parameters
sent to the CPX field bus node
displayed by the module common error LED.
reserved
monitoring actuator supply (short circuit/overload or undervoltage)
reserved
monitoring parametrizing faults
Monitoring short circuit at outputs:
Monitoring can also be set for the complete CPX terminal (see CPX system
manual, system parameter Monitoring").
Monitoring parametrizing faults:
Some parameters are checked for non−permitted values during parametrizing:
Data format
Lower limit
Upper limit
With the exception of the parameter Data format", the setting of the module
parameter Monitoring parametrizing faults" is only effective if the appropri
ate channel parameter Monitoring parametrizing faults" is set to active".
m = module number (0 ... 47)
Festo P.BE−CPX−AX−EN en 0503b