Festo CPX-AB Series Electronic Manual page 34

1. Overview and connection technology I/O modules
1
Cover AK−8KL
2
Screw connector
set VG−K−M9
Fig. 1/5: Cover and screw connector set for sub−base CPX−AB−8−KL−4POL (for complying
with protection class IP65/IP67)
1−16
2. When the terminal is unlocked you can insert or pull out
the ends of the cable through the opening.
3. Remove the screwdriver from the unlocking opening. The
cable will then be securely locked.
You will then comply with protection class IP65/IP67
In order that sub−base CPX−AB−8−KL−4POL complies with
protection class IP65/IP67, use cover type AK−8KL and the
screw connector set type VG−K−M9 from Festo. Note the rel
evant fitting instructions.
1
Sub−base CPX−AB−1−SUB−BU−25POL
The completely fitted sub−base CPX−AB−1−SUB−BU−25POL
complies with protection class IP20.
In order that sub−base CPX−AB−1−SUB−BU−25POL complies
with protection class IP65/IP67, use plug type
SD−SUB−D−ST25 from Festo.
Festo P.BE−CPX−AX−EN en 0503b
2