2. Commissioning
2.2
Commissioning on the DeviceNet
2.2.1 General information
2-6
Please note
– The Festo valve terminal type CPV...-GE-DN2-8 can be
used on all DeviceNet masters.
– This chapter describes configuration and commissioning
using as an example the controllers from Allen-Bradley.
Please note the following special features when using the CPV
valve terminal on the DeviceNet:
–
The I/O addresses of all recognized DeviceNet slaves can
be freely assigned as M-file addresses or as discrete I/Os
in the Scanlist.
–
The addresses of network slaves are normally assigned in
ascending order.
–
The input and output addresses can be assigned indepen-
dently of each other.
Please note
Order the I/O addresses of the network slaves so that
there is sufficient reserve for later extensions.
The following sections contain generally valid instructions for
configuring a valve terminal on the DeviceNet.
Detailed information can be found in the documentation or in
the help for the configuration program you are using.
Festo P.BE-CP-DN2-EN en 0107NH