Festo CPX-AB Series Electronic Manual page 163

5. Analogue output module CPX−2AA−U−I
Festo P.BE−CPX−AX−EN en 0503b
Setting the output signal range
You can set the signal range of the relevant analogue output
with the 2−element DIL switches 0 and 1.
Signal Setting the DIL switches
range
Setting
0 ... 10 V
0 ... 20 mA
4 ... 20 mA
1)
DIL switch 0 for output channel 0
DIL switch 1 for output channel 1
2)
Default (factory setting)
Tab. 5/2: DIL switches of the analogue output module
Please note
The setting of the signal range with the DIL switches can
be modified by parametrizing (see section 5.4). Parame
trizing has precedence over the DIL switch setting.
1)
DIL switch 0 DIL switch 1
2)
0.1: OFF 1.1: OFF
2)
0.2: OFF 1.2: OFF
0.1: ON 1.1: ON
0.2: OFF 1.2: OFF
0.1: OFF 1.1: OFF
0.2: ON 1.2: ON
0.1: ON 1.1: ON
0.2: ON 1.2: ON
2)
2)
5−7