Selecting A Channel; D Selecting An Operating Channel; D Selecting The Priority A Or B Channel - Icom IC-F7010 Series Operating Manual

3
BASIC OPERATION

Selecting a channel

D Selecting an operating channel

<Key or Selector operation>
z Rotate [Selector]. (Only the Portable type)
z Push [CH Up] or [CH Down].
<Ten-key operation>
Portable: For the Ten-key type
Mobile: For the optional HM-220T or HM-221T
microphone
z Push the keypad to directly enter a channel number,
depending on the presetting.
Example: Selecting Channel 2
Push [0] → [0] → [2
<Voting operation>
The transceiver automatically starts scanning when a
Zone specifi ed for the Voting operation is selected.
The Voting scan detects the signal strength of the
repeaters, and automatically selects the strongest
one.
<Automatic Scan operation>
Depending on the presetting, when the user turns ON
the transceiver, a scan automatically starts. The scan
stops when a call is received.
hand
].
abc
3-4

D Selecting the Priority A or B channel

<Key operation>
Push [Prio-A] or [Prio-B] to select the Priority A or
Priority B channel.
<Menu operation>
(Menu > Channel/Scan > Priority A CH)
(Menu > Channel/Scan > Priority B CH)
1. Push [Menu] to display the "Menu" screen.
2. Push [Left] or [Right] to select "Channel/Scan,"
then push [OK].
3. Push [Up] or [Down] to select "Priority A CH" or
"Priority B CH," then push [OK].
(Example: Priority A CH)
4. Hold down [Back] for 1 second to return to the
standby screen.