Basic Operation; Selecting A Channel - Icom IC-M25 Instruction Manual

4

BASIC OPERATION

Selecting a channel

Choose the appropriate channel group for your operating
area, and then select the desired channel.
❏ Selecting a channel group
1 Push [CH/WX] to exit the WX group if necessary.
2 Hold down [U/I/C] (CH/WX) for 1 second to change the
channel group. Repeat to advance to the next group.
• The selectable channel groups differ, depending on the
transceiver version.
For USA, EXP and CHN versions
Hold down
International channels
These display may be different in some transceiver versions.
8
U.S.A. channels
for 1 second
Canadian channels
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
For UK and AUS versions
Hold down
for 1 second
International channels
For NLD version
Hold down
for 1 second
International channels
❏ Selecting a regular channel
 Push [▲] or [▼] to select a channel.
• "DUP" appears for duplex channels.
Duplex channel is selected.
U.S.A. channels
ATIS channels