Disconnecting From A Bluetooth; Device - Icom IC-F7010 Series Operating Manual

11
Bluetooth ® OPERATION

Disconnecting from a Bluetooth

You can disconnect from a Bluetooth device without
cancelling the pairing.
(Menu > Bluetooth > BT Device List)
1. Push [Menu] to display the "Menu" screen.
2. Push [Left] or [Right] to select "Bluetooth," then
push [OK].
3. Push [Up] or [Down] to select "BT Device List,"
then push [OK].
4. Push [Up] or [Down] to select the Bluetooth device
that is currently connected, then push [OK].
5. Push [Up] or [Down] to select "Disconnect," then
push [OK].
®

device

6. The transceiver disconnects from the Bluetooth
device, and "" disappears beside the device's
icon.
 The transceiver is still paired with the Bluetooth
device.
TIP: You can reconnect to the Bluetooth device
displayed on the screen again by doing the following
steps.
1. Push [Up] or [Down] to select the Bluetooth
device to connect, then push [OK].
2. Push [Up] or [Down] to select "Connect," then
push [OK].
• Connects to the device.
3. Do steps 7 ('Set the Bluetooth Serial Port') and
8 ('Connection') on page 11-10 to connect.
• After the connection is successful, the display
returns to the standby screen.
11-11