Pairing With A Headset - Icom IC-F7010 Series Operating Manual

11
Bluetooth ® OPERATION

Pairing with a headset

Step 1: Entering the Pairing mode
 See the Bluetooth device's instruction manual for
details.
Step 2: Turning ON the Bluetooth function
 See page 11-3 for details.
Step 3: Searching for the headset
1. Push [Menu] to display the "Menu" screen.
2. Push [Left] or [Right] to select "Bluetooth," then
push [OK].
3. Push [Up] or [Down] to select "BT Device List,"
then push [OK].
4. Push [Up] or [Down] to select "Find Device," then
push [OK].
TIP: If the transceiver has been connected to
the Bluetooth headset before, its name may be
displayed in step 4 on the next page. In that case,
push [Up] or [Down] to select it, then push [OK] to
connect.
(Headset) 5. Push [Up] or [Down] to select "Headset," then
(Transceiver)
(Transceiver)
6. When pairable headsets are found, their names
TIP: If the transceiver cannot fi nd any pairable
devices, the following screen is displayed. In that
case, do step 4 on the next page to search for a
device again.
11-4
push [OK] to start searching.
are displayed on the screen.
Continued on the next page.