D Af Output (Menu > Bluetooth > Bt Audio Setting); D About The Vs-3 Headset - Icom IC-F7010 Series Operating Manual

11
Bluetooth ® OPERATION
Headset settings
D AF Output
(Menu > Bluetooth > BT Audio Setting)
You can set the audio output device when a Bluetooth
headset is connected.
If the "BT Audio Setting" item is set to "BT & SP,"
you can hear audio from both a connected Bluetooth
headset and the transceiver's speaker.
See page 6-16 for details.

D About the VS-3 headset

You can set the detailed settings of the optional VS-3
.
Bluetooth
headset
• Key Beep (p. 6-16)
(Menu > Bluetooth > Key Beep (VS-3))
Set a beep to sound when you push [PLAY], [FWD] or
[RWD] on the VS-3. This setting is different from the
transceiver's beep setting. When both settings are set
to "ON," the beeps sound on the transceiver and on
the headset.
• Power Save (p. 6-16)
(Menu > Bluetooth > P.Save (VS-3))
The Power Save function temporarily disconnects
the Bluetooth connection if no communication or
operation is performed for 120 seconds, to prolong the
VS-3's battery life.
• PTT Beep (p. 6-16)
(Menu > Bluetooth > PTT Beep (VS-3))
Set a beep to sound when you push [PTT] on the VS-
3. This setting is different from the transceiver's beep
setting. When both settings are set to "ON," the beeps
sound on the transceiver and on the headset.
• One-touch PTT (p. 6-16)
(Menu > Bluetooth > One-touch PTT)
The One-Touch PTT function enables you to toggle
between transmit and receive by pushing [PTT].
11-6