Icom IC-F7010 Series Operating Manual page 25

2
PANEL DESCRIPTION
Assignable Software key functions
D For keys and keypads (Continued)
Category: Trunking
(For only the revision 2.00 or later.)
Site Alias
Push to display the RFSS ID and Site ID, or the Site
Alias name if entered.
Site Lock
Locks the transceiver in the current registered site.
This function inhibits the transceiver from roaming
other sites.
Site Select
Edit the RFSS ID or connect to the site.
Editing the RFSS ID:
1. Push to display the current site name.
2. While displaying the site, push [OK] to display its
RFSS ID and the Site ID.
3. Hold down [OK] to enter the editing mode.
4. Push [Up] or [Down] to set.
Connecting to the site:
1. Push to display the current site name.
2. Hold down [OK] to connect to the site.
3. While displaying the site, hold down [OK] to
connect to the site.
Site Change Beep
Select whether or not to sound a beep after
registration and group affiliation are successful in the
Trunking system.
Band Scan
Push to start and cancel the Band Scan.
L You cannot use this key while scanning, transmitting, or in
the Conventional mode.
2-17