Selecting A Scan List - Icom IC-F7010 Series Operating Manual

5
SCAN OPERATION

Selecting a Scan list

You can select a Scan list to be scanned.
Channels included in the selected Scan list are
scanned during a scan.
When selecting a zone type Scan list, the channels
that are in the same zone as the Scan start channel
will be scanned.
<Key operation>
1. Hold down [Scan Start/Stop] for 1 second to
display the "Scan List" screen.
2. Push [Up] or [Down] to select a list, then push
[OK].
<Menu operation>
(Menu > Channel/Scan > Scan List)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Channel/Scan,"
then push [OK].
3. Push [Up] or [Down] to select "Scan List," then
push [OK].
• Displays the "Scan List" screen.
4. Push [Up] or [Down] to select a list, then push
[OK].
5. Hold down [Back] for 1 second to return to the
standby screen.
5-4