Bluetooth - Icom IC-F7010 Series Operating Manual

6
MENU SCREEN

Bluetooth

Bluetooth
Turns the Bluetooth function ON or OFF.
• OFF: Turns OFF the function.
• ON: Turns ON the function.
Bluetooth Reset
Initializes the Bluetooth unit.
Only when the Bluetooth function is OFF, initialization
can be done
Bluetooth Auto Connect
Select whether or not to automatically connect to the
paired Bluetooth device when its power is turned ON.
• OFF: Does not connect to the paired device.
• ON: Automatically connects to the last connected
device.
NOTE: The transceiver connects to the last
connected device, if the connecting operation is
performed on the device side, even if this item is set
to OFF.
Bluetooth Audio Setting
Selects the AF Output device when a Bluetooth
headset is connected.
• BT Only: Sets the Bluetooth headset as the AF
Output device.
• BT & SP: Sets the Bluetooth headset and the
transceiver's speaker as the AF Output
devices.
BT Device Info
Displays the installed Bluetooth unit name, address,
supported profile, and its version information.
BT Device List
Displays the paired Bluetooth devices.
To find other Bluetooth device, select "Find Device."
LSee pages 11-4 and 11-7 for details.
Key Beep (VS-3)
Sets the beep sound when the optional VS-3
Bluetooth Custom Key ([PLAY]/[FWD]/
headset
[RWD]) is pushed.
• OFF: No beep sounds.
• ON: A beep sounds.
P.Save (VS-3)
Selects whether to operate in the Bluetooth headset's
Battery Saving mode when the optional VS-3
Bluetooth
headset
Save is activated, the user cannot use the VOX
function.
NOTE: When a third-party headset or a data device
is connected, this function is automatically set to
OFF, even if this item is set to ON.
• OFF: Turns OFF the function.
• ON: The Power Save mode is enabled when no
communication or operation is performed for
120 seconds.
PTT Beep (VS-3)
Sets the beep sound when [PTT] is pushed on the
optional VS-3 Bluetooth
• OFF: No beep sounds.
• ON: A beep sounds.
One-touch PTT
Sets the One-Touch PTT function when the Bluetooth
headset is connected. The function enables a user to
transmit without continuously holding down [PTT].
NOTE: When a third-party headset is connected, this
function may automatically be set to ON, even if this
item is set to OFF.
• OFF: Push [PTT] to transmit, then release to
receive.
• ON: Push [PTT] to transmit, then push again to
receive.
Waiting Pairing
Enters the pairing request wait mode. The transceiver
waits for a pairing request from a Bluetooth device.
6-16
is connected. When the Power
.
headset