Icom IC-F7010 Series Operating Manual page 29

2
PANEL DESCRIPTION
Assignable Software key functions
D For the AB Switch (For the Portable type transceiver) (Continued)
Null
No function.
Zone
Rotate to select a zone.
Prio-A/Prio-B
Rotate to select the Priority A or Priority B channel.
Lock
Rotate to turn the key lock function ON.
Lone Worker
Turns the Lone Worker function ON or OFF.
L I f no operation occurs during the specified period, the
Lone Worker function automatically makes the transceiver
enter the emergency mode.
NOTE: To use the Lone Worker function, set the
related settings using the programming software.
High/Low
Rotate to switch the transmit output power to "Low1"
from the independent settings fro each channel.
Talk Around
Rotate to turn the Talk Around function ON.
L The Talk Around function equalizes the transmit frequency
to the receive frequency for transceiver-to-transceiver
communication.
Surveillance
Rotate to turn the Surveillance function ON.
L When this function is turned ON, the beep is not heard
and the backlight and the Status indicator do not light,
even when a signal is received, or a key is pushed.
Scrambler/Encryption
In the Analog mode
Rotate to turn the Voice Scrambler function ON.
L The Voice Scrambler function provides private
communication between stations.
In the Digital mode (For only the revision 2.00 or later.)
Push to turn the Voice Encryption function ON or OFF
L The Voice or Data Encryption function provides private
communication between stations by using an Encryption
Key and Key ID.
Compander
In the Analog mode
Rotate to turn the Compander function ON.
Site Lock
Locks the transceiver in the current registered site.
This function inhibits the transceiver from roaming
other sites.
2-21