Icom IC-F7010 Series Operating Manual page 122

11
Bluetooth ® OPERATION
Accepting a pairing request from a Bluetooth
6. Push [Up] or [Down] to select "Connect," then
push [OK].
• Connects to the device.
Step 7: Set the Bluetooth Serial Port
If the Serial Port Access Authorization screen as
shown below is displayed, accept it.
 The content of screen may differ, depending on the
device.
See the device's instruction manual for details.
(Example)
® device (Continued)
(Bluetooth device)
11-10
Step 8: Connection
1. After the transceiver and the device connection
has succeeded, "" is displayed beside the
device icon.
2. Hold down [Back] for 1 second to return to the
standby screen.
" " is displayed instead of "
•
NOTE: When you pair with the third party's headset,
entering a PIN code or passkey may be required.
See the headset's instruction manual for details.
(Transceiver)
"
.