Incoming Call Log Function; D Checking The Incoming Call Log; D Deleting The Incoming Call Log - Icom IC-F7010 Series Operating Manual

8
MDC 1200 SYSTEM OPERATION

Incoming Call log function

After receiving an MDC SelCall, Call Alert call, or
Emergency call, the call log may be displayed,
depending on the presetting. Up to 5 calls can be
memorized, and the oldest call is deleted when a 6th
call is received.

D Checking the Incoming call log

(Menu > Signaling/Call > Incoming)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Signaling/Call,"
then push [OK].
3. Push [Up] or [Down] to select "Incoming," then
push [OK].
 If there is no log, an error beep sounds and the log is
not displayed.
" is for the Emergency calls.
"
" is for the SelCalls.
"
" is for the Call Alert calls.
"
4. Hold down [Back] for 1 second to return to the
standby screen.
D Deleting the Incoming call list
The receive call log can be deleted from the Incoming
list.
(Menu > Signaling/Call > Clear Incoming)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Signaling/Call,"
then push [OK].
3. Push [Up] or [Down] to select "Clear Incoming,"
then push [OK].
4. Push [Left] or [Right] to select <OK>, then push
[OK].
• The selected call log is deleted from the Incoming list.
5. Hold down [Back] for 1 second to return to the
standby screen.
8-9