Icom IC-F7010 Series Operating Manual page 117

11
Bluetooth ® OPERATION
Pairing with a headset (Continued)
Step 4: Connecting to the headset
1. Push [Up] or [Down] to select the headset to
connect, then push [OK].
• Connects to the headset.
• After the transceiver and the headset connection has
succeeded, "" is displayed beside the device icon.
2. Hold down [Back] for 1 second to return to the
standby screen.
• While connected to a headset, " " is displayed
instead of " ."
(Transceiver)
NOTE: The transceiver connects to the last
connected device, if the connecting operation is
performed on the device side, even if the "Auto
Connect" item is set to OFF.
TIP: When you turn ON the transceiver, with the
"Auto Connect" item is set to ON, the transceiver
automatically connects to the last paired device.
After connecting, " " is displayed instead of " ."
11-5