Table of Contents
Advertisement
3
Section
Turning ON the transceiver
D Turning ON the transceiver
NOTE: Before using the transceiver for the fi rst time,
the battery pack must be fully charged for optimum
life and operation. See the BASIC MANUAL for
details.
Rotate [VOL] to turn ON the transceiver.
D Adjusting the audio level
When receiving a call, rotate [VOL] to adjust the audio
output level.
Selecting a Zone and a channel
Push [Zone] or [Zone/Announce] to select a Zone.
When holding down [Zone] or [Zone/Announce], the selecting Zone number is announced.
TIP: What is a "Zone"?
Certain channels are grouped together and assigned to a Zone according to their intended use.
For example, Analog channels 'Station 1' and 'Station 2' are assigned to an "Analog" Zone, and Digital channels
'Station 3' and 'Station 4' are assigned to a "Digital" Zone.
Rotate [Rotary Selector] to select a channel.
BASIC OPERATION
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
10
[Rotary Selector]
[VOL]
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-F29DR3 and is the answer not in the manual?
Questions and answers