Changing The Sealing/Slot Strip - HAKO Scrubmaster B260 R Operating Manual

Maintenance and Servicing
5.7.2 Changing the sealing / slot strip
Check the sealing strip Fig. 48-A and the slot strip Fig. 48-B at the squeegee
weekly for wear and damage. If the used sealing edge of the strip is worn or
damaged, turn or replace the strip. Each strip can be used four times before it
needs replacing.
C
G F A
Fig. 48:
1. Pull off the suction hose Fig. 48-C.
2. Loosen the star-shaped handles Fig. 48-D and remove the squeegee.
3. Replacing the sealing strip:
Release the tension strap Fig. 48-E and remove.
Replacing the slot strip:
Fold over the turnbuckle Fig. 48-F all the way when releasing so that the
tension strap is easier to remove.
4 Remove strip from squeegee body.
5. Before turning or replacing the strips, thoroughly clean the squeegee body!
Assembly is in reverse order.
Note
The strips can be of different thickness. The turnbuckles must be
readjusted if necessary Fig. 48-G.
88
D
B
E
05-7182-01.fm