Attachments/options
6.4.3
Sweeping operation
Attention
• Do not use the pre-sweep suction unit unless the dirt hopper is
attached!
• Sweeping up dust that is hazardous to health is not permitted!
• Ensure that there is sufficient ventilation when performing
sweeping tasks in enclosed rooms!
56
Fig. 63:
1. Switch the machine on and press the Pre-sweep suction unit Fig. 63-56
button on the control panel.
2. Move the lever of the pre-sweep suction unit from pos. P to pos.1 Fig. 63-A
and set off.
6.4.4
Stop sweeping operation
1. Press the Pre-sweep suction unit Fig. 63-56 button on the control panel.
2. Move the lever of the pre-sweep unit from pos. 1 to pos. P Fig. 63-B.
6.4.5
After sweeping
Danger
• Risk of electric shock!
Do not clean the electrical components using water!
Attention
• Make sure that the dust filter is not wet.
• Insert the dirt hopper before cleaning.
• Cleaning the machine with a high-pressure cleaner or steam jet is
not permitted!
1. Drive to a suitable maintenance location.
2. Operate the shaking system.
3. Empty the dirt hopper.
102
A
B
06-7182-01.fm