Adjusting The Sealing Strips - HAKO Scrubmaster B260 R Operating Manual

5.7.3

Adjusting the sealing strips

Inclination adjustment
The correct inclination adjustment is decisive for:
• ensuring that the sealing strips of the squeegee rest evenly with the
complete contact surface on the ground.
• ensuring that the squeegee runs smoothly and evenly during the suction
process.
Fig. 49:
Fig. 50:
1. Place the machine on a level surface and lower the squeegee with the
squeegee key Fig. 50-45.
2. Loosen the lock nuts Fig. 49-A and turn the adjusting bushing Fig. 49-B to
adjust the squeegee so that the ends of the sealing strips barely have
contact with the ground.
Turning the adjusting bushing clockwise:
The distance of the sealing strip to the ground increases at the ends Fig. 49.
Turning the adjusting bushing counter-clockwise:
The distance of the sealing strip to the ground decreases at the ends Fig. 50.
3. Turn on the machine and check the suction pattern. When driving, the
sealing strips must be turn over evenly everywhere (centre and outside).
4. Tighten the lock nuts.
05-7182-01.fm
Maintenance and Servicing
A
45
B
89