Travel Drive; Brakes; Batteries - HAKO Scrubmaster B260 R Operating Manual

2.4.8

Travel drive

Standard
The travel drive consists of an electric machine and a gearbox, and fulfils the
functions of driving, braking and steering. Driving and braking are carried out
using the electric machine. Steering is carried out using a connected steering
rod. The gearbox does not require an oil change.
X-AC drive (option)
The X-AC drive is an electrical machine with a gearbox on the rear axle which
acts as a drive and deceleration aid for the travel drive on the front axle.
2.4.9

Brakes

The operator slows down the machine by releasing the accelerator pedal.
A greater braking effect is achieved by operating the brake. When the
machine comes to a standstill, the parking brake is automatically applied.
2.4.10

Batteries

The machine variants may be equipped with different battery types.
• Trough battery 36 V/480 Ah PzS, 320 A wet
• Trough battery 36 V/420 Ah PzV, 320 A maintenance free
Battery management system (BMS)
The Scrubmaster B260 R is fitted with a BMS. The BMS ensures that the
battery system is monitored. The BMS is responsible for:
• determining the battery charging state during operation
• switching off the cleaning functions when the discharge limit has been
reached to protect the battery against total discharge
Attention
When using other batteries which have been approved by Hako, the
BMS must be reset to protect the battery against total discharge.
The settings of the BMS should only be carried out by a workshop
authorised by Hako!
For more information, see section 5.2.
02-7182-01.fm
Operation
47