Ejecting The Brushes/Pads; Coupling The Brushes/Pads - HAKO Scrubmaster B260 R Operating Manual

5.5.3

Ejecting the brushes/pads

A
Fig. 42:
1. Make sure that the rotating brush unit has been raised and the machine is
stationary.
2. Select soft key Eject brushes Fig. 42-A using the turn-push knob and
confirm. The action window Fig. 42-B opens. Use the turn-push knob to
confirm the start.
The procedure starts and symbols Fig. 42-C, D appear on the multifunction
display one after the other. Only now is the procedure complete.
3. Open the wiper, see section 5.8.1 and remove the brushes/pads.
5.5.4

Coupling the brushes/pads

:
A
Fig. 43:
1. Make sure that the rotating brush unit has been raised and the machine is
stationary.
2. Open the wiper and place the brushes/pads in a central position
underneath the brush head holder.
3. Select soft key Couple brushes Fig. 43-A using the turn-push knob and
confirm. The action window Fig. 43-B opens. Use the turn-push knob to
confirm the start.
The procedure starts and symbols Fig. 43-C, D appear on the multifunction
display one after the other. Only now is the procedure complete.
4. Check whether the brushes have been coupled.
5. Close the wiper.
05-7182-01.fm
B
B
Maintenance and Servicing
C
C
D
D
83