Squeegee; Cleaning The Squeegee; Changing The Sealing Strips - HAKO Scrubmaster B100R Instruction Manual

Maintenance and Service
5.9

Squeegee

1 Squeegee
2 Suction hose
3 Star-shaped knob
4 Sealing strip
5 Fastening device
6 Adjusting nuts
7 Support roller
1
2 3 1 5
Fig.15

5.9.1 Cleaning the squeegee

To clean the squeegee (Fig. 15/1), raise
it, disconnect the suction hose (Fig. 15/
2), loosen the two star-shaped knobs
(Fig. 15/3) and remove the squeegee.

5.9.2 Changing the sealing strips

Check the inner and outer sealing strips
(Fig. 15/4) on the squeegee for signs of
wear. The sealing strips can be turned
four times (90°) and reused.
1. Raise the squeegee.
2. Disconnect the suction hose.
7 4 6
3. Loosen the two star-shaped knobs
and disassemble the squeegee.
4. Loosen the fastening device (Fig. 15/
5) and remove the outer sealing
strip. Turn the sealing strip or re-
place it, as necessary. Change the
inner sealing strip in the same way.
45