Battery; Checking The Charging State - HAKO Scrubmaster B260 R Operating Manual

Maintenance and Servicing
5.2

Battery

5.2.1

Checking the charging state

Fig. 24:
The charge condition of the battery Fig. 24-A is displayed on the multifunction
display during operation. Depending on the charge condition, the following
symbols appear:
Symbols
to
68
Charging state
Battery is fully
charged
Battery capacity is
displayed in steps
of 10 %
Battery capacity less
than 10 %
Battery is empty
BMS service infor-
mation. A four-digit
service code
appears at the same
time Fig. 24-B
Notes
Battery can be charged
Cleaning functions are switched off
after 3 minutes.
Charge the battery!
Cleaning functions will be
switched off.
Only travel at half speed is possible.
Battery must be fully charged
immediately!
Service information, see section 3.6.
B
A
≤ 60 %
05-7182-01.fm