Cleaning The Waste Water Tank - HAKO Scrubmaster B260 R Operating Manual

5.4.2

Cleaning the waste water tank

Clean the waste water tank daily or as required.
Fig. 35:
1. Empty the waste water tank, see section 5.4.1.
2. Open fastener at drain hose Fig. 35-A and remove hose.
3. Open the tank cap Fig. 35-B of the waste water tank.
• Reach into the recessed grip of the tank cap with one hand.
• Open the tank cap until the support Fig. 35-C engages.
4. Clean the waste water tank thoroughly with the water hose/spray nozzle
Fig. 35-D.
5. Also flush the drain hose.
6. Close the tank cap:
• Reach into the recessed grip with one hand and open the tank cap a little
further.
• Release the support Fig. 35-B with your right hand and close the tank cap.
7. Position the drain hose on the neck of the maintenance opening (arrow
must point upwards) and securely close using the fastener.
05-7182-01.fm
A
Maintenance and Servicing
37
B
C
79