Cleaning The Fresh Water Filter; Checking The Seal In The Tank Cap - HAKO Scrubmaster B260 R Operating Manual

5.4.6

Cleaning the fresh water filter

Check the filter sieve Fig. 39-A of the fresh water filter Fig. 39-12 weekly and
clean or replace it as required.
B
12
Fig. 39:
1. Close the ball cock Fig. 39-B.
2. Turn and remove the filter cover Fig. 39-C.
3. Remove the filter sieve Fig. 39-A from the filter housing and clean it under
running water. Replace the filter sieve as required.
4. Reinsert the filter sieve and filter cover and open the ball cock.
5.4.7

Checking the seal in the tank cap

Fig. 40:
Check the function of the seal in the tank cap Fig. 40-A daily and replace it if
damaged.
When replacing the seal:
• pay attention to correct installation position – sealing lip Fig. 40-B must be
facing outwards,
• ensure that the disconnection point of the seal finishes edge to edge – the
disconnection point Fig. 40-C must be below the dripping edge of the cover
Fig. 40-D,
• ensure that the seal is pressed fully into the groove.
05-7182-01.fm
A
D
C
Maintenance and Servicing
C
B
A
81