Changing The Sealing / Slot Strip - HAKO Scrubmaster B400 R Operating Manual

Maintenance and servicing
5.11.2

Changing the sealing / slot strip

1
7 6 5
Fig. 62
1 Suction hose
2 Star-shaped handles
3 Slot strip
4 Tension strap
5 Sealing strip
6 Turnbuckle
7 Turnbuckle readjustment
Check the sealing strip Fig. 62-5 and the slot strip Fig. 62-3 at the squeegee
daily for wear and damage. If the used sealing edge of the strip is worn or
damaged, turn or replace the strip. Each strip can be used four times before it
needs replacing.
1. Pull out the suction hose Fig. 62-1.
2. Loosen the star-shaped handles Fig. 62-2 and remove the squeegee.
3. Replacing the sealing strip:
Release and remove the tension strap Fig. 62-4.
Replacing the slot strip:
Fold over the turnbuckle Fig. 62-6 all the way when releasing so that the
tension strap is easier to remove.
4. Remove the slot and sealing strip from the squeegee body.
150
2
3
4
4
Scrubmaster B400 R (7190)